If you’re looking to experience terpenes and cannabinoids at their purest, concentrates are most likely the best way to consume cannabis. However, for all those still navigating the world of dabs, the whole process can come off as too complicated and alarmingly flammable. We are here to tell you all about low temp dabs.

Historically, dabbing required torches, nails, glass straws, and a specific comfort-level with the theatre of freebasing. Dabs were traditionally reserved for the most rarified of all varsity stoner. But today dabs are as ubiquitous in the civilization as the blossoms they’re derived from. And the clinic itself has evolved beyond the messy science of torch and sock and nail.

Many individuals are utilized to high temp dabs, which happens when the nail reaches scorching hot temperatures of 600 to 900F. While we generally attempt to warm our nails or bangers as to vaporize the legal concentrate instantly, this actually results in a shorter, harsher hit. It even puts more (and unnecessary) strain on the nail and torch. But a good deal of us didn’t know there was another way to do things. Input low temp dabs.

Low temp dabbing occurs at far lower temperatures, generally around 350 to 450F. In contrary to the strong, quick rips from traditional high temp dabs, very low temp dabs create a smoother, more appetizing pull, which will be better on the lungs and the tastebuds! Now, it may leave a little concentrate behind. However, that’s what carbohydrate caps are for!

How to achieve low temp Dabs

So this part may get a little tricky. Unless of course you’re working with the e-nail, it can take some practice to discover that low-temp sweet spot. We propose starting by torching your nail or banger until it’s red hot, and after that enabling it to cool about 10-20 seconds prior to carrying a dab.

Make certain it’s hot enough to vaporize the legal concentrate you’re using, but not too hot it behaves like a normal dab and leaves a dark residue behind. Depending upon the material and depth of your nail you can have to adjust the short cooling period and take a number of test dabs to get it right. Eh, there are worse things!

If you don’t want to chance it, then we propose investing in an e-nail. They are less cheap than torches, so you may wish to go the standard torch route if you’re ballin’ on a paying spending budget. But they do deliver exact results, letting you attain the exact temperature you desire with no trial and error. More money, less hassle and good low temp dabs.

Why dab at a lower temperature?

The most typical mistake rookie dabbers make is overheating their material. Why? Dabbing at too high of a temperature which burns away the fragile cannabinoids your concentrate worked so hard to isolate. Turn a similarly fragile balance of terpenes acrid and introduce undesirable carcinogenic compounds

Handheld torches are a very common source of heat for dabbing — notably with glass rigs — but using them increases the possible risk of incinerating cannabinoids before they’ve had a possibility to activate, which kind of invalidates the whole process of dabbing

How does Dabbing work?

When dabbing, a little dose of cannabis concentrate is dropped onto a hot nail, to vaporize the cannabinoids and terpenes contained inside – all of the great stuff. Cannabinoids are chemicals such as THC, CBD, along with other useful compounds contained in cannabis, while terpenes are the aromatic chemicals that give cannabis goods their taste and smell. These chemicals boil, or vaporize, between 315-440°, F. This brink, therefore, is the minimal temperature range required to fully vaporize the cannabinoids and terpenes on your concentrate.

THC dabs are, of course, ever-popular, but there is something to be said for dabbing CBD isolates or concentrates, specifically for medicinal purposes. The best part about dabbing CBD is the capability to attain fast-acting symptom relief, even for extreme symptoms. Bear in mind, a quality dab rig and a reliable dabbing torch make a big difference in your experience.

Low temp dab vs high temp dab

With respect to dabbing, the temperature should be looked as a continuum. From too low to too large, it is a spectrum, after all. Why you need to Low Temp Dab: you will get more flavour from the concentrate, which is especially nice if you have got your hands on an, especially tasty terpene forward dab. You will also be capable to take smoother, longer hits.

The downside: The vapor produced at lower temperatures is not as dense, generates milder effects. And might leave some concentrate behind. Why you need to High Temp Dab: You’ll produce a deliciously thick vapor that is dense and gratifying, you will feel the ramifications of your concentrate intensely, and all the concentrate will be consumed, leaving no trace or residues that may muddy the taste of future dabs. The downside: In higher temperatures, you will lose some of the flavour intensity, especially the sweeter notes. The vapor becomes more bitter and, therefore, harder for the throat and lungs.

0-300°F is too low

This may result in minimal vaporization of available cannabinoids and terpenes, but not much – you aren’t going to be consuming any place near all the concentrate dropped on the nail. Anticipate the concentrate to leave a puddle of oil on the dabbing surface which generates little vapor.

Low temp dabs at 315-450°F

This can be the sweet spot, for the vaporization of all cannabinoids and terpenes while keeping maximum flavor. Dabbing at this temperature will generate a smooth hit that’s relatively easy on the lungs and quite terpene forwards in flavor. The effects will be pleasant, although milder than they will be at hotter temperatures.

Medium temp dab at 450-600°F

That’s a great middle ground for all those seeking a balance of flavour and intensity. At this temperature, a mix of vaporization and combustion occurs. Meaning that what you’re cleansing with your hit is a combination of vapor and smoke. Which implies that a dab at this temperature could be more difficult on your lungs, particularly in the event you have a tendency to cough easily.

High temp dab at 600-900°F

At this temperature, the nail may continue to be glowingly hot and combustion is sure to occur. This may produce a severe, extreme hit with thick smoke — a little vapor, but not much. At this temperature, you’re more burning your dab compared to flash-vaporizing it. Majority of the flavour will be dropped at this temperature, leading to a dab which tastes bitter, intense, and rather burnt. It’s effective, sure, however it probably won’t even be the smoothest dab you’ve taken.

Burnt dab at 900+°F

We don’t even recommend taking dabs at this temperature — it’s not pleasant. Even the tastiest of concentrates are rendered acrid and charred-tasting at this temperature. This degree of heat is better suited to a kiln than to a dab rig.

What to use for low temp dabs?

Based on your special setup, you’ll either be using a torch or an electrical heating element to heat your nail. With a torch, you can heat your nail everywhere from 0-1,000+°F (0-538°C). The exact same is true for electric claws, or e-nail, which utilizes an electric coil to heat the dabbing surface — most coils may be set to temperatures which range from 0-900°F (0-482°C). The main point to notice with e-nails, particularly, is that there’s a consistent disparity between the temperature setting on the device and the actual dabbing surface temperature across models. Meaning, though the heating system is set to 680°F, the dabbing surface could only be 600°F.

In addition, not all nail materials (electrical or otherwise) are the same — each has distinct heating and cooling properties. The following properties hold true no matter whether you heat the nail with a torch or an electrical coil.

  • Titanium: Boasts a Fast heating and Higher temperature retention, but supplies the cheapest flavour quality of the bunch
  • Ceramic: Although it may take the longest to heat up. Ceramic claws are durable, keep heat well, and produce decent flavour.
  • Quartz (depending on thickness): Heats up reasonably rapidly, cools down quickly and generates high quality, tasty vapor.

Keep in mind that not all ceramic claws are secure for dabbing — there’s a big variance in titanium quality and purity. Stick to manufacturers who utilize tested type two titanium. As you could have deduced, the actual temperature where you take your dab will be the consequence of a distinctive combination of nail material, depth, and the specific heating element used. As you might imagine, there are rather different models of torches and electrical units available. The 700°F placing could be too hot on one e-nail but only right on another.

Tips for low temp dabs

Given the manual element of heating a nail with a torch on traditional rigs, our recommendation is to concentrate on the factors you can control with every dab – just how long you heat the nail for and just how long you allow it to cool. Utilizing a timer during heating and cool down can make sure an accurate count with every dab. Try heating the nail for thirty seconds, allowing it’s cool for 20, and after that taking your dab. If it is too hot, allow it cool a couple added seconds. If it is too cold, wait less time before dabbing.

Additionally, you may use a heat gun to try and find a more accurate temperature reading of the dabbing surface. The Perfect Temperature for Dabs on a E nail. Don’t worry about the particular temperature setting on the heating element – what is the temperature of the nail surface. It’s not strange for a quartz e nail to have a surface temperature that’s 100°, F lower than the set temperature on the unit.

With this in mind, you need to get at know your e nail particularly. As your friend’s suggested dabbing temperature can be significantly too hot/cold for you. Most e claws adjust the temperature in 10°, F periods. So making several small adjustments of 10-20°, F at a time can help you to find your favorite temperature.

The temperature of vape pens

The same temperature rules apply when utilizing a vaporizer pen. In fact, several new vaporizer pens have adjustable heat settings for this reason. On pen mode vape, the increments by which you may adjust the temperature have a tendency to be more precise, which makes them perfect for your dab connoisseur.

Experiment with various settings to get the ideal temperature for you. If you are like us always choose your vaporizer pen on the go, we suggest transporting it in a discreet and protective stash box just like a security case. It’s room for your all of your stoner kit essentials such as a vaporizer pen, tampon, concentrates and much more. Given that the Transportation Security Administration published guidelines on how best to take your vape pen on a plane, you are able to travel safely.

Bottom line

Legacy cannabis smokers might think there’s an inherent association between higher temperatures and being intensely stoned. But that’s not really the case. Dabbing at reduced temperatures not only removes germs from the puff pass standard, however, it also triggers a far higher proportion of cannabinoids and has the exact same fast acting effects as higher temp combustion. Ditching the torch to dab at a very low temp won’t only preserve your concentrates. But additionally, it’ll drastically improve the comfort, cleanness, and psychotropic encounter of your dab without sacrificinging an intense high.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may also like