If you are looking for how to grow gorilla glue 4 tips, this article provide complete guide including eight easy tips.

A balanced hybrid with slightly sativa-leaning effects is the Gorilla Glue #4 strain. A cross of Chocolate Diesel, Sour Dubb, and Chem’s Sister is also named Original Glue. From their highly sticky buds, this strain gets its name. The resin amount is also so high that growers sometimes complain that when trimming, their scissors get stuck together!

This is an indicator of intense potency. The THC content of Gorilla Glue https://en.m.wikipedia.org/wiki/Gorilla_Glue #4 is estimated to be up to 30 percent! The high gives a feeling of euphoria while also encouraging users to keep focused. Those who grow this strain discover that it can yield up to 18 ounces indoors per square meter planted. It has a flowering period of 8-9 weeks. You may expect it to yield up to 21 ounces per plant outdoors. Usually, harvest time is around mid-October.

We include eight gorilla glue 4 grow tips on how to cultivate this highly potent cannabis strain in this guide.

Gorilla glue 4 grow tips

1 Avoid GG4 plants from hermaphrodite

The Gorilla Glue #4 strain was developed by a breeder known as Josey Wales. It has received many awards, including recognition in 2014 at separate Cannabis Cups. There is one minor problem, however: GG4 was developed from a hermaphroditic plant. In such plants, male and female flowers grow.

A recipe for failure is to let male plants flourish in your cannabis garden. They will scatter their pollen sacks and destroy your crop. One of the secrets to avoiding ‘hermie’ plants is to guarantee that they are not nervous.

One of the secrets to avoiding ‘hermie’ plants is to guarantee that they are not nervous.

This means keeping pests and intruders at bay and maintaining the correct conditions for the growth of your GG4 plants. Below, we outline how to do all of this. Around four weeks into the growth cycle, pay particular attention to your plants. You will begin to decide the gender of your plants from this stage.

Analyze the region of your Gorilla Glue #4 plants between the nodes. It is from there that there are pre-flowers. You can spot stigma-producing bracts in female plants. You’ll see pollen sacs in males, which are tiny round balls. In order to grow gorilla glue 4, keep in mind that If you see plants containing bags, immediately remove them from your yard.

2-Best measures of temperature & humidity

The optimum room temperature for GG plants during the vegetative stage is approximately 80 degrees Fahrenheit. You may lower it to about 75 degrees by the start of the flowering stage. During the daytime, keep it to this level. The temperature at night is predicted to drop by around 10 degrees Fahrenheit. Do not allow it to fall lower, lest the plants be stressed

Your Gorilla Glue #4 seedlings need a relative humidity (RH) level of about 60 percent with regard to humidity. Throughout the vegetative stage, start reducing it gradually. The RH should be no higher than 45 percent when your plants are ready to switch to the blooming process. You can keep reducing it, so by harvest time it is about 30-35 percent.

To measure the RH in the air, investing in a humidity sensor is worthwhile. To increase or reduce RH as required, you may also want to buy a humidifier or dehumidifier. If you notice that the temperature of the growing room is too warm, buy fans to help cool things down. If you need to raise the temperature, there are special heaters available.



3-Feeding the #4 Gorilla Glue

During the vegetative stage, keep the level of nitrogen high. This process will ensure that healthy foliage is produced by your plants. It is also a good idea to add potassium while still vegging your crop. In the first couple of weeks, supplements like Voodoo Juice can come in handy.

You can reduce the intake of nitrogen marginally once your GG4 plants are in the blooming process. Boost feeding with potassium and phosphorus. Do not ignore secondary nutrients including magnesium, calcium, and sulfur. Adding them will help the buds fatten.



4- How to detect excess or shortages of nutrients

The fourth important gorilla glue 4 grow tip is dilute them when adding nutrients and begin with a relatively small quantity. Test for abundance or lack of nutrients. In both cases, the nutrient-dependent symptoms can differ. For example, nitrogen deficiency symptoms can include:

Flowering time with gorilla glue Yellowing of ripe leaves, particularly close to the bottom of the plant Fewer bud sites with early flowering of the plants Black patches on leaves or discolouration

Signs of phosphorus deficiency can include: Stems of purple leaves Spots of copper, black, or purple on the leaves A dark bronze or a metallic color may transform the leaves With a deficiency of potassium, signs include:

Tips on the Burnt Leaf Starting to curl up the leaves Brown’s spots You don’t really need to recognize any symptom of excess or deficiency of nutrients. However, you may have a problem if you see odd spots, yellowing leaves, or curled up leaves. The quicker you spot the problem, the better the opportunity to fix it.

5 How to treat pests

This is one of the important gorilla glue 4 grow tips for better results. A mixture of four cups of water and five tablespoons of soap for the dish. In handling spider mites and aphids, this mixture does a fantastic job.

Oil from Neem. This is a fungicide and an insecticide of natural origin. It functions well against mites, aphids and other soft-body insects.

Oh! Beer! In a saucer, put some beer. It attracts slugs and snails and kills them.

The pungent scent of Garlic keeps insects away.

The Spray Pyrethrum. It is another insecticide that is safe. It comes from dried chrysanthemum flowers on this occasion. In order to deal with flying insects, mix it with dish soap and water.

6-The lighting

Exposing your Gorilla Glue #4 plants to bright light is enticing. This allows them, after all, to evolve. GG4, however, is a strain of cannabis that does not grow under intense sun. You will need to be careful when selecting a lighting system if you are planting your crop indoors.

The three most popular rising light choices are HIDs, CFLs, and LEDs.

The three most popular rising light choices are HIDs, CFLs, and LEDs. Here is a brief summary of each one:

For more than 30 years, HIDs have been a common alternative and remain a good choice for autoflowering plants. Most growers tend to use Metal Halide lights for flowering during the vegetative stage and HPS lights. Look for bulbs between 400W and 600W if you want HIDs. Also, make sure they’re 30-50cm above your crop canopy.

In the cooler white spectrum, CFLs run and are an alternative to metal halide bulbs. A 250W CFL will, indeed, produce equivalent outcomes to a 400W HID. As little as 10cm away from your plants, you can put a CFL. In the vegetative process, it is better to use CFLs because they are not strong enough for flowering.

A relatively new alternative is LED lighting. The cost of the setup is substantially higher than for other lamps. In the long run, though, they can save you money by trimming your energy bill. LEDs with just 350W can do better than HIDs with 600W. Also, LEDs have a greater range of light spectrum than their rivals.

An LED device is worth consideration if you want to grow a lot of cannabis plants. HIDs should prove more than sufficient for smaller growers.

7-Use Green Screen for Higher Yields (SCROG)

It is best to choose low-stress training (LST) methods, unless you are an accomplished marijuana grower. To promote faster growth, these methods include gently manipulating the branches of your plants.

One of the most common LST techniques is the SCROG method. If you leave your plants alone with Gorilla Glue #4, they will grow tall rather than large. With SCROG, the upper branches are forced down while the lower ones are taken up. The approach involves putting a projector above the earth (or whatever the growing medium is). You bend and weave them once the branches expand through the screen. The branch redirection method allows you to build a flatter canopy.

The Yield of Gorilla Glue #4

You will preferably position your screen about 20 cm above the bottom of your plants. When the GG4 plants grow tall enough to be 5 cm above the mesh, under the screen, begin tucking each branch. Point them on the screen into the next square. For the entire vegetative process, you can proceed to SCROG.

8- Gorilla Glue #4 Trimming

Last but not least gorilla glue grow 4 tips is when your GG4 plants are ready for harvesting, it is time to cut them down and begin to trim them. Due to the stickiness of the buds, GG4 poses a challenge. Growers usually prefer wet trimming, which requires instantly cutting sugar leaves. The flowers, however, remain sticky because they retain a lot of water. This is becoming much more of a concern with GG4.

Dry trimming is generally considered to be the most demanding choice. With Gorilla Glue #4, however, it is worth considering this strategy because the buds are less sticky. Be sure to remove the larger fan leaves as soon as possible after harvest, regardless of the option you select.

You also need at least two pairs of scissors for curved trimming. These devices’ rounded blades fit neatly around the buds’ base. Don’t purchase anything in your hands that doesn’t feel comfortable.

With Gorilla Glue #4, it doesn’t take long for your scissors to gunk up. Cleaning includes rubbing them with a material such as rubbing alcohol or white vinegar. Soak a clean cloth in it and massage the blades until they feel less sticky if you opt for the vinegar. For anyone using alcohol, soak the scissors for a few minutes in the solution.

Growing Gorilla Glue #4 Final Thoughts

The above tips will hopefully assist you in your quest to grow GG4 plants at home. Realistically, growing your crop indoors is your best choice. Make sure you are not exposed to stress from your plants. Otherwise, pollen sacs, an occurrence that could spell disaster for your marijuana garden, could be created.

Try to adhere to our recommendations as closely as possible about temperature, humidity, lighting, and eating. Regularly check your Gorilla Glue #4 plants, and buy an extra pair of trimming scissors!

See also https://mycbdtips.com/5-steps-guide-to-make-delicious-weed-coffee/

Leave a Reply

Your email address will not be published. Required fields are marked *

You may also like